Changelog

1. Fygo’s proprietary RAID acceleration technology optimizes sequential read and write performance for RAID 5 and RAID 6 arrays on EXT4 and BTRFS. This improves the efficiency of storing and retrieving large files such as high-definition videos and images. Compared with FygoOS 1.0, performance has improved by more than 30%. As the number of drives in the array increases, the performance advantage becomes more pronounced, reaching up to 4x the performance.
2. Fygo’s proprietary array protection technology is now available. If hardware instability causes a drive to temporarily lose power and disconnect, the kernel takes over read/write requests and maintains normal array operation after the drive recovers, reducing the risk of data loss.

*Note: This protection mechanism is not a substitute for reliable hardware. Please use reliable hardware.*

1. Added a Hardware Acceleration page under Hardware & Power for centralized management of acceleration devices used for hardware transcoding and AI tasks. Drivers and runtimes can now be installed and configured from one place. Hardware transcoding also supports multiple acceleration devices, which the system automatically schedules and assigns to tasks.
2. Fixed an issue where DLNA information was displayed from an incorrect source.
3. Added support for displaying authorization information for newly authorized hardware.

1. Fixed an issue where IPv6 addresses could occasionally be lost when DHCPv6 was in use.

1. Fixed an issue where average GPU and NPU utilization could be displayed with incorrect decimal precision.
2. Fixed an issue where the physical VRAM capacity of some Intel Xe discrete GPUs was displayed inaccurately.
3. Updated the NVIDIA GPU name database to recognize additional GPU models that were previously missing.

1. Fixed an issue where text input could be interrupted when searching with a Chinese input method in the web interface.
2. File uploads via file collection links now support resumable uploads. If an upload is interrupted, it can continue without starting over.

1. Fixed an issue where an app installation could not be canceled immediately after it started.
2. Added support for passing the initial style configuration when opening an app’s Web UI.

1. Added support for German, French, and Spanish.

1. Improved GPU request fallback and retry logic for AI services.

1. Applied the September security and stability updates for Fygo OS.

1. Added a column view option and a file preview pane.

1. “System Configuration” under “Update & Restore” has been renamed “Backup & Restore.” You can now back up system configuration and selected app data to a storage space and restore them on another device. (This feature requires updated versions of Videos and Photos. Please watch for upcoming app update notifications.)
2. Fixed an issue where notification settings could not be re-enabled after being disabled.
3. Updated the NVIDIA GPU name database to recognize additional GPU models that were previously missing.

1. Improved app installation and update speeds and reduced instances of progress getting stuck at 45%.

1. Fixed an issue where SMB did not reflect username changes.
2. Fixed an issue where a mounted directory could not be opened if its name contained consecutive spaces.

1. Containers can now be stopped while they are restarting, allowing users to stop containers caught in an infinite restart loop.

1. Added Fygo’s proprietary GPU Shader acceleration and zero-copy processing for AMD platforms. This overcomes native GPU format limitations and expands official GPU-accelerated media encoding and decoding support to professional formats, including HEVC RExt 4:2:2 and APV 4:2:2 Pro.
2. Enhanced hardware decoding capabilities for GPUs integrated into J4125, J5005, and N4200 processors, with added support for Dolby Vision tone mapping.
3. Upgraded the media service with expanded GPU hardware decoding support for HEVC RExt, Apple ProRes HQ, and Apple ProRes RAW formats.

1. Fixed an issue where Intel GPUs could not be correctly utilized for AI hardware acceleration in systems equipped with multiple Intel GPUs.

1. Optimized GPU/NPU utilization display rules for systems with multiple GPUs or NPUs.
2. Added NPU utilization monitoring for AMD chips.
3. Added Compute utilization monitoring for NVIDIA GPUs.
4. Added temperature monitoring for Intel integrated and discrete GPUs, with automatic thermal throttling to prevent overheating.

1. Fixed an issue where sharing settings for external storage devices were lost after a system restart. After installing this update, the sharing settings must be configured again once for the fix to take effect.
2. Added support for viewing snapshots (Previous Versions) of SMB-mounted Team Files and App Files in Windows File Explorer.

1. Fixed an issue where Deny permissions assigned to the Users group prevented users from viewing their Personal Files.
2. Fixed an issue that could cause file creation or renaming to fail in certain scenarios.
3. Fixed an issue that could prevent access to shared folders in certain scenarios.

1. Improved the user experience across the Containers, Compose, and Local Images pages.

1. Added thumbnail generation support for `.ai` and `.eps` image files.

1. Optimized the font color of app security alerts in dark mode.

1. Free Up Space removes local copies of backed-up photos and videos.
2. Delete Sync also removes local photos deleted from the NAS.
3. Faster backups with file scanning.
4. Check backup status and filter photos that have not been backed up.
5. Adaptive video transcoding speeds up startup.
6. Refresh thumbnails to fix display issues.

1. Set download and install locations, auto-updates, and security sync.

1. Link Aggregation now supports 2 to 8 network interfaces.

1. Added support for RKMPP, Vulkan, and V4L2 M2M.

1. Free Up Space removes local copies of backed-up photos and videos.
2. Delete Sync also removes local photos deleted from the NAS.
3. Faster backups with file scanning during backup.
4. iCloud original backup uses less data and storage space.
5. Back up selected albums or exclude albums from backup.
6. Check backup status and filter photos that have not been backed up.
7. Video transcoding adapts resolution to network conditions.
8. Refresh thumbnails to fix display issues.

1. Set default locations, auto-updates, and security sync.

1. Link Aggregation now supports 2 to 8 network interfaces.

1. Added support for RKMPP, Vulkan, and V4L2 M2M.

1. Optimized HEIC / HEIF preview compatibility in Chromium-based browsers such as Chrome and Edge.

1. Strengthened data isolation for duplicate and similar photo checks, and fixed an issue where other users' photos could appear.

1. Added automatic login session renewal during active use.

1. Added support for setting the default app used to open each file type. When multiple apps are associated with a file type, right-click the file and select “Manage Default Apps” to quickly change it.

1. Added a Default Apps page for managing the default app used to open each file type.

1. Added an API framework that allows third-party apps to declare and call APIs for authorized folders, authorized files, and more.
2. Fixed an issue where setting default-volume through appcenter-cli had no effect.

1. Fixed an issue where CPU usage could increase abnormally after enabling an access code.

1. Fixed an occasional issue where Scheduled Power did not take effect.

1. Fixed an issue where videos failed to play in Photos.

1. Optimized the device access code validation mechanism.

1. Fixed an issue where users had to re-enter the access code when opening an app after already entering it.

1. Optimized the device access code validation mechanism.

1. Fixed an issue where users had to re-enter the access code when opening an app after already entering it.

1. Fixed an issue where direct link playback of some STRM files was blocked.

1. Fixed an issue where network connections were not fully released after the iSCSI app exited unexpectedly.

1. Added support for enabling and configuring an access code. After it is enabled, an extra layer of protection is added before accessing the device. Users must pass access code verification before entering the system and apps, reducing external access risks.
2. Added Security and Stability Updates, supporting patch updates from the server and automatic installation settings.
3. Tip: After enabling the access code, you can add the code to the URL for direct access, so the access code entry page will not appear: Domain or IP: {domain_or_ip}/c/{code} FygoConnect: fynas.net/{fygoId}/c/{code}

Note: After enabling the access code, related clients must also be updated to the following versions or later to enter and verify the access code correctly:

• Fygo App v1.33.0
• Fygo TV mobile app v1.11.0
• Fygo TV for Android TV v1.3.0
• Fygo TV for Apple TV v1.5.0
• FygoSync client v0.2.2

1. Added support for thumbnail generation for .ai and .eps images.

1. Improved the interaction experience on pages such as Containers, Compose, and Local Images.

• Added support for Raspberry Pi 3B / 3B+ / 3A+ / 4B / 5, including 1GB to 16GB variants.For a smoother experience, we recommend using a device with 2GB RAM or above.

1. Added support for creating file request links for folders. External users can upload files to the NAS without logging in via a link or QR code.

1. Added support for enabling automatic app updates. You can customize the update time window and app scope, and disable automatic updates in app settings.

1. Link Aggregation now supports aggregating 2 to 8 network interfaces.
2. Optimized IPv6 policy routing to prevent residual rules from affecting usage.
3. Fixed an issue where the wireless card could not be enabled when the Wi-Fi configuration was missing.
4. Fixed an issue where network interface names might change after restarting the device, ensuring consistent naming.

1. Added support for importing and exporting containers and images in the interface.
2. Added support for creating macvlan and ipvlan networks in the interface.
3. Added support for enabling GPU resources when creating containers, with the option to select a macvlan or ipvlan network.
4. Optimized the interaction experience on pages such as Containers and Compose.
5. When cleaning up a Compose project, locally built images are now deleted by default.
6. When disabling the Docker service, you can choose to stop all running containers at the same time.
7. Fixed an issue where tampering with daemon.json could cause containers or data to be lost.

1. Added support for displaying Intel NPU data.
2. Fixed an issue where GPU utilization data for Intel Xe3 was not displayed.

1. Optimized memory usage for face recognition in Photos and fixed an issue where people could not be grouped when there were too many photos.
2. Optimized the GPU fallback logic for AI Service. When the GPU cannot be used, tasks will fall back to the CPU.

1. Fixed an issue where password-protected Fygo share links could not be recognized when adding download tasks.

1. Fixed an occasional issue where video frames were lost during transcoded playback or download.

1. Optimized part of the permission scope for regular users to improve certificate service security.

1. Fixed an issue where deleting ZFS snapshots caused sharing settings to be lost.

Added support for playing Live TV libraries.

• Compatible with the updated file permission mechanism in system v1.2.0, resolving virtual machine creation failures
• Support managing and accessing virtual machines from the mobile app

• Added support for playing HTTP live streams forwarded from RTP/UDP multicast sources
• Improved strm stream information extraction compatibility.

1. Added live TV media library settings

1. Optimized playback decoding logic to improve playback stability
2. Fixed a possible issue when switching playback episodes

1. Added support for LAN live TV sources

1. Added concurrency limiting when creating media libraries

1. Optimized the guidance copy for importing AI models from NAS
2. Optimized guidance when AI Search returns no results

1. Optimized AI Search result quality

1. Fixed an issue where Samba clients did not refresh promptly after directory changes.

1. Fixed an issue where file names were displayed incorrectly on some exFAT external storage devices.

1. Fixed an issue where requests for the corresponding app icon could fail during app installation or update.
2. Optimized app folder access authorization: restricted access to system directories such as docker and @appcenter under authorized volumes, excluding @appshare, to prevent app runtime issues caused by permission problems.
3. Optimized App Center user permissions to improve the security of third-party apps.

1. Optimized permission verification logic to improve the reliability of 2FA trusted devices.

1. Fixed an issue where the unless-stopped container auto-start policy could fail in certain scenarios.
2. Fixed an issue where Docker could still start automatically after a system restart even if it had been manually disabled.
3. Fixed an issue where Docker-related services could cause the device to hang or shut down slowly during shutdown.